COMPAQ COMPUTER CORPORATION PROLIANT 1000R Processor 80486DX2 Processor Speed 66(internal)MHz Chip Set Unidentified Video Chip Set None Maximum Onboard Memory 128MB (EDO supported) Maximum Video Memory None Cache 256KB BIOS Unidentified Dimensions Unidentified I/O Options Unidentified NPU Options None 34369 CONNECTIONS Note: The location and types of I/O options are unidentified. USER CONFIGURABLE SETTINGS Function Label Position » Factory configured - do not SW4/1 On alter » Soft switching mode enabled SW4/2 On Soft switching mode disabled SW4/2 Off » Keyboard broadcasting mode SW4/3 Off disabled Keyboard broadcasting mode SW4/3 On enabled » Mouse broadcasting mode SW4/4 Off disabled Mouse broadcasting mode enabled SW4/4 On » Scan mode enabled SW4/5 On Scan mode disabled SW4/5 Off » Tiering mode disabled SW4/6 Off Tiering mode enabled SW4/6 On » Factory configured - do not SW4/7 Unidentified alter » Factory configured - do not SW4/8 Unidentified alter DRAM CONFIGURATION Size Bank 0 Bank 1 Bank 2 Bank 3 16MB (1) 4M x 36 None None None 16MB (1) 2M x 36 (1) 2M x 36 None None 16MB (1) 1M x 36 (1) 1M x 36 (1) 1M x 36 (1) 1M x 36 24MB (1) 2M x 36 (1) 2M x 36 (1) 2M x 36 None 32MB (1) 8M x 36 None None None 32MB (1) 4M x 36 (1) 4M x 36 None None 32MB (1) 2M x 36 (1) 2M x 36 (1) 2M x 36 (1) 2M x 36 48MB (1) 4M x 36 (1) 4M x 36 (1) 4M x 36 None 64MB (1) 8M x 36 (1) 8M x 36 None None 64MB (1) 4M x 36 (1) 4M x 36 (1) 4M x 36 (1) 4M x 36 128MB (1) 8M x 36 (1) 8M x 36 (1) 8M x 36 (1) 8M x 36 CACHE CONFIGURATION Note: The chip size of the 256KB cache is unidentified. MONITOR SELECTION NOTE Note: The Proliant 1000R is capable of controlling up to 8 servers, each with their own monitor. To select a monitor type for a specific server, first consult either the 4 or 8 Port Monitor Control Selection Table to determine which switches are used for the configuration.. Then refer to the Server Monitor Selection table to determine the individual switch settings. 4 PORT MONITOR CONTROL SELECTION Switch Controlling switches Server controlled S1 S1/1 - 4 1 S1 S1/5 - 8 2 S2 S2/1 - 4 3 S2 S2/5 - 8 4 8 PORT MONITOR CONTROL SELECTION Switch Controlling switches Server controlled S1 S1/1 - 4 1 S1 S1/5 - 8 2 S2 S2/1 - 4 3 S2 S2/5 - 8 4 S3 S3/1 - 4 5 S3 S3/5 - 8 6 S4 S3/1 - 4 7 S4 S3/5 - 8 8 SERVER MONITOR SELECTION Type SW1/1 or SW1/2 or SW1/3 or SW1/4 or SW1/5 SW1/6 SW1/7 SW1/8 VGA Off Off On Off Monochrome Off Off On Off VGA Off On Off Off SVGA Off On Off Off SVGA- Compaq On On Off On 430 XVGA – IBM8512 Off On Off Off XVGA – IBM8513 Off On Off Off XVGA – IBM8514 On On Off Off XVGA – IBM8515 On Off Off Off Note: Each bank of switches must reflect the type of monitor configured on the server. TECHNICAL NOTE Note: Diagram not available.