MAGNAVOX 286/386SX-16 Processor 80286/80386SX Processor Speed 12/16MHz Chip Set Unidentified Video Chip Set None Maximum Onboard Memory 8MB Maximum Video Memory None Cache None BIOS Unidentified Dimensions 220mm x 220mm I/O Options Floppy drive interface, IDE interface, parallel port, serial ports (2), VGA port, riser slot connector NPU Options 80287/80387SX [Image] CONNECTIONS Purpose Location Purpose Location IDE interface J1 Parallel port J10 Floppy drive interface J2 VGA port J12 9-pin serial port J5 Riser slot SL1 25-pin serial port J7 CPU module connector SL2 Front panel connector J8 USER CONFIGURABLE SETTINGS Function Label Position » On board 1MB memory enabled S1/1 On On board 1MB memory disabled S1/1 Off » Floppy drive interface enabled S1/2 Off Floppy drive interface disabled S1/2 On » On board video enabled S1/3 Off On board video disabled S1/3 On » Password enabled S1/4 On Password disabled S1/4 Off » Monitor type select monochrome W3 Open Monitor type select color W3 Closed Parity chips installed for W13 Pins 1 & 2 onboard 1MB memory closed Parity chips not installed for W13 Pins 2 & 3 onboard 1MB memory closed » Speaker volume select normal W16 Open Speaker volume select low W16 Closed » Parity chips not installed W18 Open Parity chips installed W18 Closed DRAM CONFIGURATION Size Bank 0 Bank 1 1MB 1MB None 2MB 1MB (1) 256K x 36 5MB 1MB (1) 1M x 36 8MB 1MB (1) 2M x 36 Note: Bank 0 is factory installed and is not configurable. The location is unidentified. If 8MB is installed, S1/1 must be set to disabled. [Image] CONNECTIONS Purpose Location Mainboard module connector SL3 [Image] CONNECTIONS Purpose Location Mainboard module connector SL3 USER CONFIGURABLE SETTINGS Function Label Position » NPU not installed W1 Open NPU installed W1 Closed