ACS, INC. ACS-1000 Processor 8088 Processor Speed 4.77/8MHz Chip Set Unidentified Video Chip Set None Maximum Onboard Memory 1MB Maximum Video Memory None Cache None BIOS Unidentified Dimensions 305mm x 216mm I/O Options Floppy drive interfaces (2), SASI connector, parallel port, serial ports (2), serial bus connector NPU Options 8087 [Image] CONNECTIONS Purpose Location Purpose Location Reset switch E2 Serial port P7 Speaker P2 Parallel port P8 Floppy drive interface P3 Reset switch P9 Floppy drive interface P4 SASI interface P10 Serial bus connector P5 External battery P11 Serial port P6 USER CONFIGURABLE SETTINGS Function Label Position » Normal reset operation enabled E2 Open Reset controlled by power supply E2 Closed signal » POST normal operation S1/1 Off POST special test S1/1 On » NPU not installed S1/2 On NPU installed S1/2 Off » BIOS type select 8K/16K S1/10 Off BIOS type select 32K S1/10 On DRAM CONFIGURATION Size Bank 0 Bank 1 Bank 2 Bank 3 64KB 64K None None None 128KB 64K 64K None None 192KB 64K 64K 64K None 256KB (A) 64K 64K 64K 64K 256KB (B) 256K None None None 512KB 256K 256K None None 640KB 256K 256K 64K 64K 1MB 256K 256K 256K 256K Note: The size of the chips are unidentified. DRAM SWITCH CONFIGURATION Size S1/3 S1/4 S1/9 64KB On On Off 128KB Off On Off 192KB On Off Off 256KB (A) Off Off Off 256KB (B) On On On 512KB Off On On 640KB Off Off On 1MB On Off On CPU SPEED SELECTION Speed E1 Keyboard selectable Pins 1 & 2 closed 4.77MHz Pins 2 & 3 closed 8MHz Pins 3 & 4 closed PARALLEL PORT ADDRESS SELECTION Setting E3 » LPT2 if another device is set as Pins 1 & 2 closed LPT1. It is set as LPT1 if no other device is installed. LPT1 at all times Pins 3 & 4 closed SERIAL PORT ADDRESS SELECTION (P6) Setting E4 » COM1 Pins 1 & 2 closed COM2 Pins 3 & 4 closed COM3 Pins 5 & 6 closed COM4 Pins 7 & 8 closed SERIAL PORT INTERRUPT SELECTION (P6) IRQ E6 IRQ2 Pins 5 & 6 closed IRQ3 Pins 3 & 4 closed » IRQ4 Pins 1 & 2 closed SERIAL PORT ADDRESS SELECTION (P7) Setting E5 COM1 Pins 1 & 2 closed » COM2 Pins 3 & 4 closed COM3 Pins 5 & 6 closed COM4 Pins 7 & 8 closed SERIAL PORT INTERRUPT SELECTION (P7) IRQ E7 IRQ2 Pins 5 & 6 closed » IRQ3 Pins 3 & 4 closed IRQ4 Pins 1 & 2 closed MONITOR SELECTION Setting S1/5 S1/6 None installed On On » 80 x 25 color On Off 40 x 25 color Off On Monochrome Off Off FLOPPY DRIVE SELECTION Drives installed S1/7 S1/8 1 On On » 2 Off On 3 On Off 4 Off Off