ZEOS INTERNATIONAL, LTD.

PANTERA PENTIUM

Processor           Pentium
Processor Speed     75/90/100/120/133/150MHz
Chip Set            VLSI
Max. Onboard DRAM   384MB
Cache               256/512KB (on external cache card)
BIOS                Unidentified
Dimensions          330mm x 218mm
I/O Options         Parallel port, serial ports (2), Infrared COM port,
                    32-bit PCI slots (3), floppy drive interface, IDE
                    interfaces (2), SCSI interface, 10-baseT connector,
                    10-base2 connector, Legacy connector, VRM connector,
                    cache slot
NPU Options         None

[Image]

                                CONNECTIONS

  Purpose                Location      Purpose                Location

  Serial port 1             J2         10-base2 connector        J11

  IR COM connector          J3         SCSI connector            J12

  Serial port 2             J4         IDE interface LED     J13 pins 1 &
                                                                  2

  Parallel port             J5         Speaker               J13 pins 5 -
                                                                  9

  Floppy drive              J6         Power LED &           J14 pins 6 -
  interface                            keylock                   10

  IDE interface 2           J7         Reset switch          J15 pins 2 &
                                                                  4

  Legacy connector          J8         32-bit PCI slots       PC1 - PC3

  IDE interface 1           J9         External cache            SL1
                                       card

  10-baseT connector        J10        VRM connector            VREG1

                        USER CONFIGURABLE SETTINGS

                Function                    Jumper           Position

  »   AMD LAN or LAN/SCSI chip not           CLK1        pins 7 & 8 open
      installed

      AMD LAN or LAN/SCSI chip               CLK1           pins 7 & 8
      installed                                               closed

  »   Flash BIOS write protect enabled       CLR1           pins 1 & 2
                                                              closed

      Flash BIOS write protect               CLR1           pins 3 & 4
      disabled                                                closed

                        DRAM CONFIGURATION

      Size            Bank 0           Bank 1          Bank 2

       2MB        (2) 256K x 36         NONE            NONE

       4MB        (2) 256K x 36    (2) 256K x 36        NONE

       8MB         (2) 1M x 36          NONE            NONE

      10MB         (2) 1M x 36     (2) 256K x 36        NONE

      12MB        (2) 512K x 36    (2) 512K x 36    (2) 512K x 36

      16MB         (2) 1M x 36      (2) 1M x 36         NONE

      24MB         (2) 1M x 36      (2) 1M x 36      (2) 1M x 36

      32MB         (2) 2M x 36      (2) 2M x 36         NONE

      64MB         (2) 4M x 36      (2) 4M x 36         NONE

      128MB        (2) 8M x 36      (2) 8M x 36         NONE

      256MB        (2) 16M x 36     (2) 16M x 36        NONE

      384MB        (2) 16M x 36     (2) 16M x 36    (2) 16M x 36

                    CACHE CONFIGURATION

             Size                          SL1

            256KB              256KB cache card installed

            512KB              512KB cache card installed

                          CPU SPEED CONFIGURATION

                Speed                                CLK1

                75MHz                      pins 5 & 6, 7 & 8 closed

                90MHz                          pins 7 & 8 closed

               100MHz                          pins 5 & 6 closed

               120MHz                      pins 1 & 2, 7 & 8 closed

               133MHz                      pins 1 & 2, 5 & 6 closed

               150MHz                   pins 1 & 2, 3 & 4, 7 & 8 closed

            Note: The settings provided above apply to part numbers
            010-0066-03, 010-0066-17, and 010-0066-18 only. Using these
            settings on boards with other part numbers may cause the
            system to lock up. See the following table for settings used
            by boards with other part numbers.

                       CPU SPEED CONFIGURATION

               Speed                              CLK1

               75MHz                    pins 1 & 2, 5 & 6 closed

               90MHz                       pins 5 & 6 closed

        100MHz (bus 66MHz)                 pins 1 & 2 closed

        100MHz (bus 50MHz)          pins 1 & 2, 3 & 4, 5 & 6 closed

              120MHz                    pins 3 & 4, 5 & 6 closed

              133MHz                    pins 1 & 2, 3 & 4 closed

                         DIAGNOSTIC LED

       LED           Color                  Function

       On             Red         Power good signal is enabled

       Off            Red         Power good signal is disabled