IBM CORPORATION PS/VALUEPOINT 6384/D,6387/T (TYPE 1) Processor 80486SX/80486DX/80486DX2 Processor Speed 25/33/50(internal)/66(internal)MHz Chip Set Intel Max. Onboard DRAM 64MB Cache 128/256KB (located on external cache card) BIOS IBM Dimensions 330mm x 218mm I/O Options 32-bit riser card slot, external cache card, floppy drive interface, hard drive interface, parallel port, PS/2 mouse port, serial ports (2), video port NPU Options None [Image] CONNECTIONS Purpose Location Purpose Location Floppy drive interface J2 PS/2 mouse port J8 Hard drive interface J3 Power LED J23 Serial port 1 J7 Hard drive LED J24 Serial port 2 J12 Speaker J25 Riser card slot J13 External cache card U13 slot Parallel port J14 Riser card extension U25 slot Video port J15 USER CONFIGURABLE SETTINGS Function Jumper Position » Factory configured - do not J5 pins 1 & 2 alter closed » Write protect disabled J6 pins 1 & 2 closed Write protect enabled J6 pins 2 & 3 closed » Password operation normal J9 pins 1 & 2 closed Password clear J9 pins 2 & 3 closed » Monochrome adapter not installed J16 pins 1 & 2 closed Monochrome adapter installed J16 pins 2 & 3 closed » Video port enabled J17 pins 1 & 2 closed » Video port disabled J17 pins 2 & 3 closed DRAM CONFIGURATION Size Bank 0 Bank 1 Bank 2 Bank 3 16MB (1) 2M x 36 (1) 2M x 36 NONE NONE 32MB (1) 2M x 36 (1) 2M x 36 (1) 2M x 36 (1) 2M x 36 32MB (1) 4M x 36 (1) 4M x 36 NONE NONE 64MB (1) 4M x 36 (1) 4M x 36 (1) 4M x 36 (1) 4M x 36 64MB (1) 8M x 36 (1) 8M x 36 NONE NONE VIDEO MEMORY CONFIGURATION Size Bank 0 Bank 1 1MB (2) 512K x 8 None 2MB (2) 512K x 8 (2) 512K x 8 CPU TYPE CONFIGURATION Type J10 J11 80486SX pins 1 & 2 closed pins 1 & 2 closed 80486DX pins 2 & 3 closed pins 2 & 3 closed 80486DX2 pins 2 & 3 closed pins 2 & 3 closed Note:80486SX is only supported on model 6384/D.