PACKARD BELL PBVX588 Processor NEC V40 (Integrated 8088-compatible CPU and system controller) Processor Speed 8MHz Chip Set NEC Max. Onboard DRAM 640KB SRAM Cache None BIOS Award Dimensions 355mm x 305mm I/O Options Parallel port, serial port, video port NPU Options 8087 [Image] CONNECTIONS Purpose Location Purpose Location Parallel port P7 Speaker P12 Serial port P8 Reset P13 Video port P9 Keylock & power LED P14 Floppy drive interface P11 USER CONFIGURABLE SETTINGS Function Jumper/Switch Position » Monitor type select color TOG Left Monitor type select TOG Right monochrome » Factory test mode disabled SW1/1 Off Factory test mode enabled SW1/1 On » NPU disabled SW1/2 On NPU enabled SW1/2 Off » System speed select fast SW1/8 On (8MHz) System speed select slow SW1/8 Off (5.5 MHz) » Serial port enabled SW1/10 On Serial port disabled SW1/10 Off » Parallel port enabled SW1/11 On Parallel port disabled SW1/11 Off FLOPPY DRIVE INTERFACE CONFIGURATION Mode Drives Installed SW1/7 SW1/12 » Enabled A: On On Enabled A: & B: Off On Disabled N/A N/A Off ONBOARD VIDEO CONFIGURATION Mode SW1/5 SW1/6 SW1/9 Monochrome Off Off On 40x25 CGA Off On On » 80x25 CGA On Off On External EGA card On On Off DRAM CONFIGURATION Size Bank 0 Bank 1 Bank 2 Bank 3 SW1/3 SW1/4 256KB (8) NONE NONE NONE On On 41256 512KB (8) (8) NONE NONE Off On 41256 41256 576KB (8) (8) (2) NONE On Off 41256 41256 4464 640KB (8) (8) (2) (2) Off Off 41256 41256 4464 4464 Note:Parity sockets P1, P2, P3, and P4 are not used and should be left open. DRAM banks are soldered to the board, and should not be altered.