NEC TECHNOLOGIES, INC.

POWERMATE 386

Processor               80386DX
Processor Speed         16MHz
Chip Set                ETEQ
Max. Onboard DRAM       8MB (on system memory card)
Cache                   None
Dimensions              330mm x 218mm
BIOS                    Phoenix
I/O Options             Serial ports (2), parallel port, proprietary
                        system memory card slot, proprietary external
                        memory card slot (on system memory card)
NPU Options             80287/80387

[Image]

                                CONNECTIONS

  Purpose               Location      Purpose                  Location

  Speaker                  P1         Serial port (COM1)          P6

  External battery         P3         Serial port (COM2)          P10

  Power LED &              P4         Turbo LED                   P11
  keylock

  Parallel port            P5         Proprietary system          S1
                                      memory card

                        USER CONFIGURABLE SETTINGS

              Function                  Jumper/Switch        Position

  »   Pipeline mode enabled                 14L2             pins 1 & 2
                                                              closed

      Pipeline mode disabled                14L2             pins 2 & 3
                                                              closed

  »   Factory configured - do not           SW1/1               On
      alter

  »   Factory configured - do not           SW1/2               On
      alter

  »   Factory configured - do not           SW1/3               Off
      alter

  »   Factory configured - do not           SW1/4               Off
      alter

  »   Test mode disabled                    SW1/5               On

      Test mode enabled                     SW1/5               Off

  »   DRAM speed select 1 wait              SW1/6               Off
      state

      DRAM speed select 0 wait              SW1/6               On
      states

  »   Monitor type select color             SW2/1               On

      Monitor type select                   SW2/1               Off
      monochrome

  »   Floppy drive interface                SW2/2               Off
      address select primary

      Floppy drive interface                SW2/2               On
      address select secondary

  »   Floppy drive interface                SW2/3               On
      enabled

      Floppy drive interface                SW2/3               Off
      disabled

  »   Serial port (P10) select              SW2/4               On
      COM2

      Serial port (P10) disabled            SW2/4               Off

  »   Serial port (P6) select COM1          SW2/5               On

      Serial port (P6) disabled             SW2/5               Off

  »   System enabled                        SW2/6               On

      System disabled                       SW2/6               Off

  »   NPU enabled                           SW2/7               On

      NPU disabled                          SW2/7               Off

  »   NPU type select 80287                 SW2/8               Off

      NPU type select 80387                 SW2/8               On

  »   Factory configured - do not           SW1/9               Off
      alter

  »   Factory configured - do not          SW1/10               Off
      alter

[Image]

                    CONNECTIONS

  Purpose                              Location

  Proprietary external memory card        S1

                    DRAM CONFIGURATION

       Size              Bank 0               P-0

        2MB            (16) 44256          (8) 41256

  Note:The locations of Bank 0and P-0 are unidentified.

SYSTEM MEMORY CARD (G8BNHA)

[Image]

                    CONNECTIONS

  Purpose                              Location

  Proprietary external memory card        S1

     DRAM CONFIGURATION

     Size        Bank 0

     8MB       (72) 44256