GCH SYSTEMS, INC. EASY DATA 386SX Processor 80386SX Processor Speed 16MHz Chip Set Suntac Max. Onboard DRAM 8MB Cache None BIOS AMI/Award/Phoenix Dimensions 330mm x 218mm I/O Options Parallel port, serial port (2), floppy interface, IDE interface NPU Options 80387SX [Image] CONNECTIONS Purpose Location Purpose Location Reset switch J1 Parallel port (LPT2) P1 Turbo LED J2 Serial port (COM1) S1 Turbo switch J3 Serial port (COM2) S2 Hard drive LED J4 IDE interface S3 Speaker J5 Floppy interface S4 Power LED & keylock J6 USER CONFIGURABLE SETTINGS Function Jumper/Switch Position » Factory configured - do not JP1 Open alter » Factory configured - do not JP3 N/A alter » BIOS type select Award JP7 pins 2 & 3 closed BIOS type select Phoenix JP7 pins 1 & 2 closed » Factory configured - do not JP11 Closed alter » Monitor type select color SW1/1 On Monitor type select SW1/1 Off monochrome » Floppy drive enabled SW1/2 On Floppy drive disabled SW1/2 Off » Floppy drive address select SW1/3 Off primary Floppy drive address select SW1/3 On secondary » COM1 (S1) enabled SW1/6 On COM1 (S1) disabled SW1/6 Off » COM2 (S2) enabled SW1/7 On COM2 (S2) disabled SW1/7 Off » LPT2 (P1) enabled SW1/8 On LPT2 (P1) disabled SW1/8 Off DRAM CONFIGURATION Size Bank 0 Bank 1 Bank 2 Bank 3 512KB (2) 256K x 9 NONE NONE NONE 1MB (2) 256K x 9 (2) 256K x 9 NONE NONE 2MB (2) 256K x 9 (2) 256K x 9 (2) 256K x 9 (2) 256K x 9 2MB (2) 1M x 9 NONE NONE NONE 3MB (2) 256K x 9 (2) 256K x 9 (2) 1M x 9 NONE 4MB (2) 1M x 9 (2) 1M x 9 NONE NONE 5MB (2) 256K x 9 (2) 256K x 9 (2) 1M x 9 (2) 1M x 9 8MB (2) 1M x 9 (2) 1M x 9 (2) 1M x 9 (2) 1M x 9 NPU MODE CONFIGURATION Size JP2 JP4 Synchronous with CPU pins 2 & 3 closed pins 2 & 3 closed Asynchronous with CPU pins 1 & 2 closed pins 1 & 2 closed ON BOARD IDE CONFIGURATION Size SW1/4 SW1/5 Enabled Off On Disabled On Off BIOS CONFIGURATION Size JP5 JP6 27256 pins 1 & 2 closed pins 1 & 2 closed 27512 pins 2 & 3 closed pins 2 & 3 closed