ICL TEAMSERVER EI SERIES Processor 80486SX/80487SX/80486DX/ODP486SX/80486DX2/Pentium Overdrive/Pentium (depends on CPU card installed) Processor 25/33/40/50(internal)/50/60/66(internal)/66/80(internal)MHz Speed (depends on CPU card installed) Chip Set OPTI Max. 256MB (depends on CPU card installed) Onboard DRAM Cache 64/128/256/1024KB (depends on CPU card installed) BIOS Unidentified Dimensions 330mm x 218mm I/O Options PS/2 mouse port, parallel port, serial ports (2), floppy drive interface, IDE interface, CPU slot, 32-bit VESA local bus slots (2) NPU Options None [Image] CONNECTIONS Purpose Location Purpose Location PS/2 mouse port CN1 IDE interface LED J3 Parallel port CN2 Power on LED J5 Serial port 1 CN3 Speaker (not used) J6 Serial port 2 CN4 Keyboard/mouse J7 connector (not used) Floppy drive CN5 Reset switch JP7 interface IDE interface CN6 32-bit VESA local bus SL1 & SL2 slots Chassis fan power J1 CPU slot SL3 CPU fan power J2 USER CONFIGURABLE SETTINGS Function Jumper Position » Factory configured - do not JP5 Closed alter » Security disabled JP6 pins 1 & 2 closed Security enabled JP6 pins 2 & 3 closed » Speaker type select internal JP9 pins 2 & 3 closed Speaker type select external JP9 pins 1 & 2 closed Note: To clear CMOS memory, remove jumper on JP6. Connect middle pin on JP6 to pin 2 on CN2. DRAM CONFIGURATION (E180I CPU BOARD INSTALLED ONLY) Size Bank 0 Bank 1 Bank 2 Bank 3 16MB (1) 1M x 36 (1) 1M x 36 (1) 1M x 36 (1) 1M x 36 16MB (1) 4M x 36 NONE NONE NONE 20MB (1) 1M x 36 (1) 4M x 36 NONE NONE 24MB (1) 1M x 36 (1) 1M x 36 (1) 4M x 36 NONE 28MB (1) 1M x 36 (1) 1M x 36 (1) 1M x 36 (1) 4M x 36 32MB (1) 4M x 36 (1) 4M x 36 NONE NONE 36MB (1) 1M x 36 (1) 4M x 36 (1) 4M x 36 NONE 40MB (1) 1M x 36 (1) 1M x 36 (1) 4M x 36 (1) 4M x 36 48MB (1) 4M x 36 (1) 4M x 36 (1) 4M x 36 NONE 52MB (1) 1M x 36 (1) 4M x 36 (1) 4M x 36 (1) 4M x 36 64MB (1) 4M x 36 (1) 4M x 36 (1) 4M x 36 (1) 4M x 36 DRAM CONFIGURATION (E380I/E430I/E480I CPU BOARD INSTALLED ONLY) Size Bank 0 Bank 1 16MB (2) 1M x 36 (2) 1M x 36 16MB (2) 2M x 36 NONE 24MB (2) 1M x 36 (2) 2M x 36 32MB (2) 2M x 36 (2) 2M x 36 32MB (2) 4M x 36 NONE 40MB (2) 1M x 36 (2) 4M x 36 48MB (2) 2M x 36 (2) 4M x 36 64MB (2) 4M x 36 (2) 4M x 36 64MB (2) 8M x 36 NONE 72MB (2) 1M x 36 (2) 8M x 36 80MB (2) 2M x 36 (2) 8M x 36 96MB (2) 4M x 36 (2) 8M x 36 128MB (2) 8M x 36 (2) 8M x 36 Note: If one of the above CPU boards are installed, Bank 0 = Banks 1 & 2 and Bank 1 = 2 & 3 on the mainboard. CMOS CONFIGURATION Type JP10 JP11 JP12 JP13 Dallas pins 1 & 2 pins 1 & 2 pins 1 & 2 pins 1 & 2 closed closed closed closed Benchmark pins 2 & 3 pins 2 & 3 pins 2 & 3 pins 2 & 3 closed closed closed closed VESA WAIT STATE CONFIGURATION Wait states JP3 0 wait states pins 2 & 3 closed 1 wait state pins 1 & 2 closed BUS SPEED CONFIGURATION CPU speed JP4 <= 33MHz pins 2 & 3 closed > 33MHz pins 1 & 2 closed ON BOARD SCSI CONFIGURATION Setting JP1 JP2 Disabled Closed Closed Enabled Open Open ON BOARD SCSI CONFIGURATION Note: Mainboard has a mix of EIAS and ISA slots. The location of the EISA slots are unidentified. [Image] USER CONFIGURABLE SETTINGS Function Jumper Position » LADS setting for VESA local bus JP3 pins 1 & 2 33MHz closed LADS setting for VESA local bus JP3 pins 2 & 3 50MHz closed » Local bus enabled JP10 pins 2 & 3 closed Local bus disabled JP10 pins 1 & 2 closed » Factory configured - do not JP15 N/A alter » Factory configured - do not JP16 N/A alter » Factory configured - do not JP17 N/A alter CACHE CONFIGURATION Size Bank 0 Bank 1 TAG 64KB (4) 8K x 8 (4) 8K x 8 (1) 8K x 8 128KB (4) 32K x 8 NONE (1) 8K x 8 256KB (4) 32K x 8 (4) 32K x 8 (1) 32K x 8 CACHE JUMPER CONFIGURATION Size JP11 JP12 JP13 JP14 JP18 JP19 JP20 None Open Open Open Open Open Open Open 64KB Closed Open Open Open Open Closed Open 128KB Closed Closed Open Open Open Closed Closed 256KB Closed Closed Closed Closed Closed Closed Closed Note: Pins designated should be in the closed position. CPU TYPE CONFIGURATION Type JP4 80486SX pins 1 & 2 closed ODP486SX pins 2 & 3 closed 80487SX pins 2 & 3 closed 80486DX Open 80486DX2 pins 2 & 3 closed Pentium Overdrive Open CPU SPEED CONFIGURATION Speed JP1 JP2 JP8 JP9 25MHz Open Open pins 1 & 2 pins 1 & 2 closed closed 33MHz Open Closed pins 1 & 2 pins 2 & 3 closed closed 40MHz Closed Open pins 2 & 3 pins 1 & 2 closed closed 50iMHz Open Open pins 1 & 2 pins 1 & 2 closed closed 50MHz Closed Closed pins 2 & 3 pins 2 & 3 closed closed 66iMHz Open Closed pins 1 & 2 pins 2 & 3 closed closed [Image] USER CONFIGURABLE SETTINGS Function Jumper Position » Local bus enabled JP4 pins 2 & 3 closed Local bus disabled JP4 pins 1 & 2 closed CACHE CONFIGURATION Size Bank 0 Bank 1 256KB (4) 32K x 8 (4) 32K x 8 1MB (4) 128K x 8 (4) 128K x 8 CACHE JUMPER CONFIGURATION Size JP11 JP12 JP14 JP15 256KB Open Open Open Open 1MB Closed Closed Closed Closed CPU SPEED CONFIGURATION Speed JP1 JP2 JP3 33MHz pins 1 & 2 pins 1 & 2 pins 2 & 3 closed closed closed 40MHz pins 2 & 3 pins 2 & 3 pins 1 & 2 closed closed closed 50MHz pins 1 & 2 pins 2 & 3 pins 1 & 2 closed closed closed 60MHz pins 2 & 3 pins 1 & 2 pins 1 & 2 closed closed closed 66MHz pins 2 & 3 pins 1 & 2 pins 1 & 2 closed closed closed 80iMHz pins 1 & 2 pins 1 & 2 pins 1 & 2 closed closed closed [Image] DRAM CONFIGURATION (E480I CPU BOARD ONLY) Size Bank 0 Bank 1 16MB (2) 1M x 36 (2) 1M x 36 16MB (2) 2M x 36 NONE 24MB (2) 1M x 36 (2) 2M x 36 32MB (2) 2M x 36 (2) 2M x 36 32MB (2) 4M x 36 NONE 40MB (2) 1M x 36 (2) 4M x 36 48MB (2) 2M x 36 (2) 4M x 36 64MB (2) 4M x 36 (2) 4M x 36 64MB (2) 8M x 36 NONE 72MB (2) 1M x 36 (2) 8M x 36 80MB (2) 2M x 36 (2) 8M x 36 96MB (2) 4M x 36 (2) 8M x 36 128MB (2) 8M x 36 (2) 8M x 36 CACHE CONFIGURATION Size Bank 0 Bank 1 256KB (4) 32K x 8 (4) 32K x 8 1MB (4) 128K x 8 (4) 128K x 8 CACHE JUMPER CONFIGURATION Size JP5 JP6 JP7 JP8 256KB Open Open Open Open 1MB Closed Closed Closed Closed CPU SPEED CONFIGURATION Speed JP1 JP2 JP3 50MHz pins 1 & 2 pins 1 & 2 pins 1 & 2 closed closed closed 66MHz pins 1 & 2 pins 2 & 3 pins 1 & 2 closed closed closed